Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Bulk |
Published |
2004 |
Series |
NPCAP™-PSA |
Size / Dimension |
0.248Dia 6.30mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Termination |
Radial |
Type |
Polymer |
Max Operating Temperature |
105°C |
Min Operating Temperature |
-55°C |
Applications |
General Purpose |
Voltage - Rated |
10V |
Capacitance |
100μF |
Voltage - Rated DC |
10V |
Lead Pitch |
2.5mm |
ESR (Equivalent Series Resistance) |
25mOhm |
Lead Spacing |
0.098 2.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Ripple Current |
2.82A |
Life (Hours) |
2000 hours |
Ripple Current @ High Frequency |
2.82A @ 100kHz |
Dissipation Factor |
0.12 % |
Height Seated (Max) |
0.413 10.50mm |
Length |
10.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
The capacitance can run at the range of 100μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PSA series. This part is mounted in the way of Through Hole. The type of the APSA100ELL101MFA5G capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APSA100ELL101MFA5G is suitable to conduct the ripple current at 2.82A. APSA100ELL101MFA5G Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 10V. APSA100ELL101MFA5G Capacitor. It has Radial terminations in total. Voltage - Rated often has values of 10V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
NPCAP™-PSA Series
Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APSA100ELL101MFA5G Aluminum Polymer Capacitors.
Typically, APSA100ELL101MFA5G is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Smoothing Noise Filtering
- DC Link
- Power Line Buffering
- Lighting Ballast
- To reduce power noise & signal noise
- Voltage Doubling
- Server motherboards
- Coupling or blocking
- Motor Start
- DC Buffering