APSA160ELL101MFA5S
| Parameters | |
|---|---|
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 100μF |
| Voltage - Rated DC | 16V |
| Lead Pitch | 2.5mm |
| ESR (Equivalent Series Resistance) | 25mOhm |
| Lead Spacing | 0.098 2.50mm |
| Lead Diameter | 500 μm |
| Voltage | 16V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 2.82A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 2.82A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Diameter | 6.3mm |
| Height | 10.5mm |
| Height Seated (Max) | 0.425 10.80mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2010 |
| Series | NPCAP™-PSA |
The capacitance can run at the range of 100μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PSA series. This part is mounted in the way of Through Hole. The type of the APSA160ELL101MFA5S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APSA160ELL101MFA5S is suitable to conduct the ripple current at 2.82A. APSA160ELL101MFA5S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. APSA160ELL101MFA5S Capacitor. It has Radial terminations in total. The voltage for the part is specified as 16V volts.
NPCAP™-PSA Series
Capacitance: 100μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APSA160ELL101MFA5S Aluminum Polymer Capacitors.
Typically, APSA160ELL101MFA5S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Flashtube Ignition
- Voltage Doubling
- Server motherboards
- To enhance power efficiency
- To reduce power noise & signal noise
- Frequency Converters
- Audio Crossover
- Smoothing Noise Filtering
- DC/DC, DC/AC, and AC/AC converters
- Signal decoupling & power bypass
