APSA2R5ELL102MJB5S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2010 |
| Series | NPCAP™-PSA |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 1000μF |
| Voltage - Rated DC | 2.5V |
| Lead Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 6mOhm |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 5.86A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.86A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 10mm |
| Height | 11.5mm |
| Height Seated (Max) | 0.453 11.50mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 1000μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PSA series. This part is mounted in the way of Through Hole. The type of the APSA2R5ELL102MJB5S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APSA2R5ELL102MJB5S is suitable to conduct the ripple current at 5.86A. APSA2R5ELL102MJB5S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. APSA2R5ELL102MJB5S Capacitor. It has Radial terminations in total.
NPCAP™-PSA Series
Capacitance: 1000μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APSA2R5ELL102MJB5S Aluminum Polymer Capacitors.
Typically, APSA2R5ELL102MJB5S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- UPS Buffering
- To reduce power noise & signal noise
- DC Buffering
- Audio Crossover
- DC/DC, DC/AC, and AC/AC converters
- Spot Welding
- Power Line Buffering
- Decoupling Noise Filtering
- Motor Start
- Smoothing Noise Filtering
