APSA6R3ELL391MHB5S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2004 |
| Series | NPCAP™-PSA |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 390μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 800 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Ripple Current | 5.08A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.08A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 8mm |
| Height | 11.5mm |
| Height Seated (Max) | 0.512 13.00mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 390μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PSA series. This part is mounted in the way of Through Hole. The type of the APSA6R3ELL391MHB5S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APSA6R3ELL391MHB5S is suitable to conduct the ripple current at 5.08A. APSA6R3ELL391MHB5S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. APSA6R3ELL391MHB5S Capacitor. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts.
NPCAP™-PSA Series
Capacitance: 390μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APSA6R3ELL391MHB5S Aluminum Polymer Capacitors.
Typically, APSA6R3ELL391MHB5S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Control
- Motor Start
- Frequency Converters
- Voltage Doubling
- To reduce power noise & signal noise
- Computer motherboards
- Server motherboards
- DC/DC, DC/AC, and AC/AC converters
- To enhance power efficiency
- Coupling or blocking
