Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Operating Temperature |
-55°C~105°C |
Packaging |
Bulk |
Published |
2012 |
Series |
NPCAP™-PSF |
Size / Dimension |
0.315Dia 8.00mm |
Tolerance |
±20% |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Termination |
Radial |
Type |
Polymer |
Applications |
General Purpose |
Capacitance |
270μF |
Voltage - Rated DC |
16V |
Lead Pitch |
3.5mm |
ESR (Equivalent Series Resistance) |
11mOhm |
Lead Spacing |
0.138 3.50mm |
Lead Diameter |
600 μm |
Lifetime @ Temp |
5000 Hrs @ 105°C |
Ripple Current |
5.08A |
Life (Hours) |
5000 hours |
Ripple Current @ High Frequency |
5.08A @ 100kHz |
Dissipation Factor |
0.1 % |
Height Seated (Max) |
0.512 13.00mm |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PSF series. This part is mounted in the way of Through Hole. The type of the APSF160ELL271MHB5S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APSF160ELL271MHB5S is suitable to conduct the ripple current at 5.08A. APSF160ELL271MHB5S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. APSF160ELL271MHB5S Capacitor. It has Radial terminations in total.
NPCAP™-PSF Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APSF160ELL271MHB5S Aluminum Polymer Capacitors.
Typically, APSF160ELL271MHB5S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Factor Correction
- Smoothing Noise Filtering
- Signal decoupling & power bypass
- Spot Welding
- To reduce power noise & signal noise
- Flashtube Ignition
- To enhance power efficiency
- PFC
- DC Buffering
- UPS Buffering