APSG160ELL271MH06S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2013 |
| Series | NPCAP™-PSG |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 270μF |
| Voltage - Rated DC | 16V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 22mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Lifetime @ Temp | 20000 Hrs @ 105°C |
| Ripple Current | 3.3A |
| Life (Hours) | 5000 hours |
| Ripple Current @ High Frequency | 3.3A @ 100kHz |
| Dissipation Factor | 0.12 % |
| Height Seated (Max) | 0.236 6.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 270μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to NPCAP™-PSG series. This part is mounted in the way of Through Hole. The type of the APSG160ELL271MH06S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APSG160ELL271MH06S is suitable to conduct the ripple current at 3.3A. APSG160ELL271MH06S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. APSG160ELL271MH06S Capacitor. It has Radial terminations in total.
NPCAP™-PSG Series
Capacitance: 270μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APSG160ELL271MH06S Aluminum Polymer Capacitors.
Typically, APSG160ELL271MH06S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Flashtube Ignition
- DC/DC, DC/AC, and AC/AC converters
- Voltage Doubling
- Coupling or blocking
- To reduce power noise & signal noise
- Signal decoupling & power bypass
- To enhance power efficiency
- Motor Control
- DC Link
- Bypassing Noise Filtering
