APX803-29SAG-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX803 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 20μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Overvoltage Threshold | 2.93V |
| Number of Monitored Inputs | 4 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
APX803-29SAG-7 Overview
It is mounted through 3 terminals on the power management. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 3 pins in it. 3 pins make up the power management. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 20μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to APX803, which is the base power ics number. On the power management, 4 inputs are monitored.
APX803-29SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
APX803-29SAG-7 Applications
There are a lot of Diodes Incorporated APX803-29SAG-7 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Telecommunications equipment
- Consumer electronics
- Sensitive sensors
- Transformer load monitoring equipment
- Insulation fault location system
- Microcontroller system
- Medical-specific isolation transformer
- Electronics installed in the vehicle
- Electric heating appliances
