APX803-40SAG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX803 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 20μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 3.94V |
| Max Reset Threshold Voltage | 4.06V |
| Threshold Voltage | +4.0V |
| Overvoltage Threshold | 4V |
| Number of Monitored Inputs | 4 |
| Reset Delay Time | 200 ms |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
APX803-40SAG-7 Overview
It is mounted through 3 terminals on the power management. Power management is packaged in a Cut Tape (CT) way. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 20μA. It is always advisable to use APX803, the base supervisor number, when searching for similar PMICs from the manufacturer. There are 4 inputs monitored at once on the power management.
APX803-40SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
APX803-40SAG-7 Applications
There are a lot of Diodes Incorporated APX803-40SAG-7 Voltage Supervisors applications.
- Cloud computing
- Important electronics for automotive safety
- Linux and server computing
- Satellite navigation
- Computer applications
- Leakage protection
- Consumer electronics
- Power distribution systems of ICU
- Important electronics for automotive protection
- Smartphones
