banner_page

APX809-44SAG-7

3 Terminals 3-Pin APX809 Voltage supervisor1 Channels Min 1.1V Max 5.5V


  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-APX809-44SAG-7
  • Package: TO-236-3, SC-59, SOT-23-3
  • Datasheet: PDF
  • Stock: 893
  • Description: 3 Terminals 3-Pin APX809 Voltage supervisor1 Channels Min 1.1V Max 5.5V (Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.96mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number APX809
Output Push-Pull, Totem Pole
Pin Count 3
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.1V
Operating Supply Current 30μA
Power Dissipation 400mW
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 4.38V
Reset Timeout 140ms Minimum
Supply Current-Max (Isup) 0.04mA
Min Reset Threshold Voltage 4.29V
Max Reset Threshold Voltage 4.47V
Threshold Voltage +4.38V
Undervoltage Threshold 4.29V
Overvoltage Threshold 4.47V
Number of Monitored Inputs 1
Reset Delay Time 200 ms
Height 1mm
Length 3mm
Width 1.4mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Number of Pins 3
Weight 7.994566mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 400mW
Terminal Position DUAL

APX809-44SAG-7 Overview


There are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 3. 3 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 30μA. If you want to search for similar IC managements of this manufacturer, you can always refer to APX809, which is the base power ics number. It is possible to monitor 1 inputs at the same time on the power management as a whole.

APX809-44SAG-7 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current

APX809-44SAG-7 Applications


There are a lot of Diodes Incorporated APX809-44SAG-7 Voltage Supervisors applications.

  • Utility meter
  • Electric heating appliances
  • External alarm
  • Embedded computing
  • Dash board
  • Battery cars
  • WiFi router
  • Set top box
  • Microprocessor system
  • Battery cars

Write a review

Note: HTML is not translated!
    Bad           Good