APX810-26SAG-7
| Parameters | |
|---|---|
| Voltage - Threshold | 2.63V |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 2.57V |
| Max Reset Threshold Voltage | 2.69V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.57V |
| Overvoltage Threshold | 2.69V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
APX810-26SAG-7 Overview
As you can see, this power management is mounted through 3 terminals. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 3 pins. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 30μA. On the power management, there are a total of 1 inputs that are monitored.
APX810-26SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX810-26SAG-7 Applications
There are a lot of Diodes Incorporated APX810-26SAG-7 Voltage Supervisors applications.
- Linux and server computing
- Fire equipment power monitoring system
- Transformer load monitoring equipment
- emergency room
- Power distribution systems of operating room
- Military electronics
- Utility meter
- Medical-specific insulation monitor
- Important electronics for automotive safety
- Leakage protection
