APX810-31SAG-7
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 30μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3.08V |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
APX810-31SAG-7 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Packages are specified to have an average peak reflow temperature of 260. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 30μA for the power management. The power management monitors 1 inputs at once.
APX810-31SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX810-31SAG-7 Applications
There are a lot of Diodes Incorporated APX810-31SAG-7 Voltage Supervisors applications.
- Efficient information transmission
- Utility meter
- Unattended substation automation
- Computer applications
- Display equipment
- Transformer load monitoring equipment
- Radar
- Power distribution systems of infant care room
- Satellite navigation
- WiFi router
