APX810-40SAG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 30μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4V |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 3.92V |
| Max Reset Threshold Voltage | 4.08V |
| Threshold Voltage | +4V |
| Undervoltage Threshold | 3.92V |
| Overvoltage Threshold | 4.08V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
APX810-40SAG-7 Overview
As you can see, this power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 3 pins on power management. 3 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supply current of the power management is 30μA. There are other features such as RESET THRESHOLD VOLTAGE IS 4.0V to name a few. For similar manage ics search of the manufacturer, you can always refer to APX810, the base PMIC number. In total, there are 1 inputs on the power management that can be monitored.
APX810-40SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX810-40SAG-7 Applications
There are a lot of Diodes Incorporated APX810-40SAG-7 Voltage Supervisors applications.
- Detection of phase imbalance
- Sensitive sensors
- Power communication system
- Dash board
- Unattended substation automation
- Smartphones
- Rechargeable batteries
- Utility meter
- Battery-powered equipment
- Set top box
