APX810-44SAG-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 30μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.38V |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 4.29V |
| Max Reset Threshold Voltage | 4.47V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.29V |
| Overvoltage Threshold | 4.47V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
APX810-44SAG-7 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. 3 pins are present in total in this power management. 3 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Push-Pull, Totem Pole during operation. It is estimated that the voltage supervisor's supply current is 30μA. A similar IC managements number of the manufacturer can always be found by using APX810, the base power ics number. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
APX810-44SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX810-44SAG-7 Applications
There are a lot of Diodes Incorporated APX810-44SAG-7 Voltage Supervisors applications.
- Set top box
- Personal computers
- Detection of phase imbalance
- emergency room
- Power distribution systems of operating room
- Rechargeable batteries
- Microcontroller system
- Utility meter
- Electrical fire monitoring system
- Electric heating appliances
