APX810-46SAG-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 30μA |
| Power Dissipation | 400mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.04mA |
| Min Reset Threshold Voltage | 4.54V |
| Max Reset Threshold Voltage | 4.72V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.54V |
| Overvoltage Threshold | 4.72V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height | 1mm |
| Length | 3mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
APX810-46SAG-7 Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. Pin count of the power management is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The power management's supply current is 30μA. A similar IC managements number of the manufacturer can always be found by using APX810, the base power ics number. In total, there are 1 inputs on the power management that can be monitored.
APX810-46SAG-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current
APX810-46SAG-7 Applications
There are a lot of Diodes Incorporated APX810-46SAG-7 Voltage Supervisors applications.
- Detection of phase imbalance
- Important electronics for automotive protection
- Fire equipment power monitoring system
- Battery-powered equipment
- Refrigeration
- DSP
- Automotive permanent magnet synchronous motors
- Rechargeable batteries
- Network equipment
- Electric heating appliances
