APX823-26W5G-7
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 500mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.57V |
| Max Reset Threshold Voltage | 2.69V |
| Undervoltage Threshold | 2.57V |
| Overvoltage Threshold | 2.69V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
APX823-26W5G-7 Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a supply current of 40μA for the power management. You can always use APX823, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 40μA can be used with this power management. It is possible to monitor 1 inputs at the same time on the power management as a whole.
APX823-26W5G-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current
APX823-26W5G-7 Applications
There are a lot of Diodes Incorporated APX823-26W5G-7 Voltage Supervisors applications.
- Household appliances
- Battery-powered equipment
- Electronics installed in the vehicle
- Detection of phase sequence
- Smart meter
- Microprocessor system
- Digitally controlled LDO regulators circuit
- Medical-specific isolation transformer
- Radio
- Microcontroller system
