APX823-29W5G-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX823 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 500mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.86V |
| Overvoltage Threshold | 3V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
APX823-29W5G-7 Overview
Power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. 5 pins are present on the power management system. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a 40μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to APX823, the base PMIC number. Voltage supervisor can work with a supply temperature of 40μA at the most. The power management monitors 1 inputs at once.
APX823-29W5G-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current
APX823-29W5G-7 Applications
There are a lot of Diodes Incorporated APX823-29W5G-7 Voltage Supervisors applications.
- Embedded computing
- Data storage applications
- Consumer electronics
- External alarm
- Low voltage/high power - AI, GPU
- Power distribution systems of CCU
- Transformer load monitoring equipment
- Medical-specific insulation monitor
- Electronics installed in the vehicle
- Unattended substation automation
