APX824-46W5G-7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | APX824 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 40μA |
| Power Dissipation | 500mW |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.63V |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.54V |
| Max Reset Threshold Voltage | 4.72V |
| Undervoltage Threshold | 4.54V |
| Overvoltage Threshold | 4.72V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 280 ms |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
APX824-46W5G-7 Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. Power managment ic pin count is 5. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 40μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to APX824, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 40μA. There are 1 inputs monitored at once on the power management.
APX824-46W5G-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current
APX824-46W5G-7 Applications
There are a lot of Diodes Incorporated APX824-46W5G-7 Voltage Supervisors applications.
- Smart meter
- Functional modules
- Consumer electronics
- Linux and server computing
- Detection of phase sequence
- Fire equipment power monitoring system
- Insulation fault location system
- Satellite navigation
- Embedded computing
- Leakage current detection
