Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
470mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
APX825A |
Output |
Push-Pull, Totem Pole |
Pin Count |
6 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.1V |
Operating Supply Current |
40μA |
Nominal Supply Current |
40μA |
Power Dissipation |
470mW |
Max Supply Current |
40μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active High/Active Low |
Voltage - Threshold |
2.93V |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
2.86V |
Max Reset Threshold Voltage |
3V |
Undervoltage Threshold |
2.86V |
Overvoltage Threshold |
3V |
Number of Monitored Inputs |
1 |
Reset Delay Time |
280 ms |
Height |
1.3mm |
Length |
3.1mm |
Width |
1.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
APX825A-29W6G-7 Overview
This power management consists of 6 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. There are a total of 6 pins on power management. This power management has 6 pins. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 40μA. If you want to search for similar IC managements of this manufacturer, you can always refer to APX825A, which is the base power ics number. The maximum supply temperature is 40μA. In total, there are 1 inputs on the power management that can be monitored.
APX825A-29W6G-7 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current
APX825A-29W6G-7 Applications
There are a lot of Diodes Incorporated APX825A-29W6G-7 Voltage Supervisors applications.
- Sensitive sensors
- Set top box
- Battery cars
- Power communication system
- Consumer electronics
- Multi-voltage system
- Detection of phase sequence
- Precision measurement
- emergency room
- Data storage applications