APXA250ARA220MH70S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | Radial, Can - SMD |
| Surface Mount Land Size | 0.327Lx0.327W 8.30mmx8.30mm |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | NPCAP™-PXA |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Polymer |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Applications | General Purpose |
| Voltage - Rated | 25V |
| Capacitance | 22μF |
| ESR (Equivalent Series Resistance) | 50mOhm |
| Lifetime @ Temp | 15000 Hrs @ 105°C |
| Ripple Current | 1.8A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 1.8A @ 100kHz |
| Height Seated (Max) | 0.264 6.70mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 22μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to NPCAP™-PXA series. This part is mounted in the way of Surface Mount. The type of the APXA250ARA220MH70S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APXA250ARA220MH70S is suitable to conduct the ripple current at 1.8A. APXA250ARA220MH70S Capacitor is mounted by Surface Mount. APXA250ARA220MH70S Capacitor. Voltage - Rated often has values of 25V. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
NPCAP™-PXA Series
Capacitance: 22μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APXA250ARA220MH70S Aluminum Polymer Capacitors.
Typically, APXA250ARA220MH70S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Coupling or blocking
- Flashtube Ignition
- Audio Crossover
- Power Factor Correction
- Signal decoupling & power bypass
- UPS Buffering
- Motor Start
- Spot Welding
- Computer motherboards
- Bypassing Noise Filtering
