Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
Radial, Can - SMD |
Surface Mount Land Size |
0.406Lx0.406W 10.30mmx10.30mm |
Operating Temperature |
-55°C~105°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
NPCAP™-PXE |
Size / Dimension |
0.394Dia 10.00mm |
Tolerance |
±20% |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
SMD/SMT |
Type |
Polymer |
Applications |
General Purpose |
Capacitance |
1000μF |
Voltage - Rated DC |
4V |
ESR (Equivalent Series Resistance) |
14mOhm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Leakage Current |
800μA |
Ripple Current |
4.3A |
Life (Hours) |
15000 hours |
Ripple Current @ High Frequency |
4.3A @ 100kHz |
Dissipation Factor |
0.12 % |
Height |
10.3mm |
Height Seated (Max) |
0.303 7.70mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
The capacitance can run at the range of 1000μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can - SMD. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to NPCAP™-PXE series. This part is mounted in the way of Surface Mount. The type of the APXE4R0ARA102MJ80G capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. United Chemi-Con APXE4R0ARA102MJ80G is suitable to conduct the ripple current at 4.3A. APXE4R0ARA102MJ80G Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 4V. APXE4R0ARA102MJ80G Capacitor. There are 800μA to protect the current flowing from the ground conductor to ground. It has SMD/SMT terminations in total.
NPCAP™-PXE Series
Capacitance: 1000μF
Tolerance: ±20%
Package / Case: Radial, Can - SMD
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of APXE4R0ARA102MJ80G Aluminum Polymer Capacitors.
Typically, APXE4R0ARA102MJ80G is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Flashtube Ignition
- UPS Buffering
- Decoupling Noise Filtering
- Frequency Converters
- Motor Start
- DC Link
- DC Buffering
- Coupling or blocking
- Power Factor Correction
- PFC