AS11P2TLRQ
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 21.092045mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 1.2Ohm |
| Max Power Dissipation | 1.12W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AS11P2 |
| Number of Outputs | 2 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 1.12W |
| Max Supply Current | 1μA |
| Turn On Delay Time | 28 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 21 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 1.2Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 28ns, 21ns |
| Charge Injection | 33pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -80dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height | 500μm |
| Length | 1.25mm |
| Width | 1.05mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AS11P2TLRQ Overview
Packed in 6-UFDFN, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Cut Tape (CT). A switch device like this is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. These analog multiplexers are built based on SPDT switching circuits. Search with AS11P2 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 1.2Ohm. For functions related to 6 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 4.5V. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. Analogue multiplexers require a 1.65V~4.5V voltage to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. The 1 inputs need to be operated in order to work. In this digital multiplexer, there are 2 outputs.
AS11P2TLRQ Features
Switch Circuit: SPDT
-3db Bandwidth: 150MHz
AS11P2TLRQ Applications
There are a lot of STMicroelectronics AS11P2TLRQ Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Precision test equipment
- Routers
- Cross Connects
- PDAs
- Battery-powered systems
- SDH
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- CSU
- Industrial and process control systems
