AS1741G-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 800mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 22 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 14 ns |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF 35pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 22ns, 14ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
AS1741G-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. 8 pins are injected to the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. It consists of 2 circuits. In this multiplexer, the internal resistance is 800mOhm. To find out what the functions of 8 pins are, please refer to their datasheets. Users shouldn't supply more than 3.6V voltage to the switch device. Single supply type digital switch with a low cost. 1.6V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 10nA current would suffice. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage.
AS1741G-T Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
-3db Bandwidth: 130MHz
AS1741G-T Applications
There are a lot of ams AS1741G-T Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Industrial control systems
- Microprocessor controlled systems
- Multi-Line E1 Interface Cards
- PBXs
- Sample-and-hold systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Data Acquisition Systems
- CSU
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
