AS1742G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 800mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 362mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 250mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF 35pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 22ns, 14ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Length | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AS1742G Overview
Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. This electronic part offers high-quality output due to its 1 channels. A 1.8V voltage supply should turn on and run the electronic component. It is part of the design of the 8 series that this electronic component is included. These analog multiplexers are built based on SPST - NC switching circuits. The multiplexer consists of 2 circuits. In this multiplexer, the internal resistance is 800mOhm. For functions related to 8 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.6V. In order to operate this switch device, it would need a current of 10nA. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 250mA, damage can occur.
AS1742G Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 130MHz
AS1742G Applications
There are a lot of ams AS1742G Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Microprocessor Controlled Analog Systems
- Medical Instrumentation
- CSU
- Avionics
- Fiber In The Loop (FITL)
- Avionics test equipment
- PCMCIA cards
- Channelized and Unchannelized DS3 applications
- Communications systems
