Parameters |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
800mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
362mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.6V |
Operating Supply Current |
10nA |
Nominal Supply Current |
10nA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
22 ns |
Supply Type |
Single |
Bandwidth |
130MHz |
Turn-Off Delay Time |
14 ns |
On-State Resistance (Max) |
800mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
35pF 35pF |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
22ns, 14ns |
Charge Injection |
6pC |
Channel-to-Channel Matching (ΔRon) |
20m Ω |
Crosstalk |
-100dB @ 1MHz |
Switch-on Time-Max |
30ns |
Voltage - Supply, Single (V+) |
1.6V~3.6V |
Length |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
AS1743G Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 8 series of products. The analog switch ics are built using SPST - NO/NC switching circuits. There are 2 circuits in this switch device. As far as internal resistance is concerned, it has 800mOhm. Datasheets for functions of 8 pins are available. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.6V should be applied to the electronic component. 10nA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. A digital multiplexer may suffer damage if voltage is applied above 1μA. The data can be transferred over a wide range of bandwidths, called 130MHz bandwidths.
AS1743G Features
1 Channels
Switch Circuit: SPST - NO/NC
10nA Supply Current
Bandwidth: 130MHz
AS1743G Applications
There are a lot of ams AS1743G Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- RGB switches
- USB 1.1 signal switching circuits
- Avionics and Military Systems
- HDTV
- Access Concentrators
- Video signal routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- MP3 players
- Multiplexers