AS1744G-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 10nA |
| Supply Type | Single |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 52 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 17ns, 6ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
AS1744G-T Overview
Packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 10 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. Electronic part bodies are injected with 10 pins. SPDT switching circuits are used in these analog switch ics. The multiplexer consists of 2 circuits. As far as internal resistance is concerned, it has 4Ohm. Please refer to the datasheets for 10 pins functions. A analog switch ic that has a cost-effective Single supply type. The switch device would be able to operate with 10nA current. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage.
AS1744G-T Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
AS1744G-T Applications
There are a lot of ams AS1744G-T Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Video signal routing
- 65 V DACs
- High-Voltage
- Avionics and Military Systems
- Cross Connects
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Data switching
- Private Branch Exchange (PBX)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
