AS1747-BTDT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 850mOhm |
| Max Power Dissipation | 1.951W |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10nA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 400 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 200 ns |
| -3db Bandwidth | 31MHz |
| On-State Resistance (Max) | 850mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Channel Capacitance (CS(off), CD(off)) | 63pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -90dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AS1747-BTDT Overview
As the electronic part is packed in 10-WFDFN Exposed Pad, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. On the other hand, analog switches can be constructed using SPDT switching circuits. This multiplexer is composed of 2 circuits. Internally, this switch multiplexer has a resistance of 850mOhm. For details about the functions of 10 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 10nA. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. Putting voltage greater than 1μA on the multiplexer may cause damage.
AS1747-BTDT Features
Switch Circuit: SPDT
10nA Supply Current
-3db Bandwidth: 31MHz
AS1747-BTDT Applications
There are a lot of ams AS1747-BTDT Analog Switches & Multiplexers ICs applications.
- FTTH
- T1/E1 Terminals
- Sample hold systems
- ATM
- ISDN NT1/TA
- Data switching
- Battery Powered Systems
- Modems
- Ultrasound
- Automatic test equipment
