AS1751S
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 900mOhm |
| Max Power Dissipation | 1.349W |
| Reach Compliance Code | unknown |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 100nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 22 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 14 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 45pF 45pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 22ns, 14ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Drain to Source Resistance | 900mOhm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AS1751S Overview
Due to its 14-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. 1:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. A SPST - NO switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. There is 900mOhm internal resistance in this digital multiplexer. Datasheets for 14 pin functions are available upon request. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.6V. The analogue multiplexer could operate on 100nA current. A voltage of 1.6V~3.6V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. There is 900mOhm resistance between Drain and Source for this electronic part.
AS1751S Features
Switch Circuit: SPST - NO
100nA Supply Current
Drain-to-Source resistance: 900mOhm
AS1751S Applications
There are a lot of ams AS1751S Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Residential Gateways, Home Gateway/Router
- SDH/SONET multiplexers
- Video signal routing
- Sample-and-hold systems
- High speed data transmission line cards
- PDAs
- Voice over IP/DSL – Integrated Access Devices, Smart
- Wireless Local Loop
- CSU
