AS1752S
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 900mOhm |
| Max Power Dissipation | 1.349W |
| Reach Compliance Code | unknown |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 16 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 45pF 45pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 22ns, 14ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AS1752S Overview
Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. Based on SPST - NC switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. This digital multiplexer has 900mOhm internal resistance. The datasheets for the 14 pins explain the functions. Users shouldn't supply more than 3.6V voltage to the switch device. Single supply type digital switch with a low cost. A low voltage of 1.6V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 100nA current. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 100nA.
AS1752S Features
Switch Circuit: SPST - NC
100nA Supply Current
AS1752S Applications
There are a lot of ams AS1752S Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- DSLAMs
- Communications systems
- PDH Multiplexers
- Digital Cross-Connects
- Battery Powered Systems
- Communication systems
- Audio and video switching
- Medical
- Switching Systems
