AS1753S
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 900mOhm |
| Max Power Dissipation | 1.349W |
| Reach Compliance Code | unknown |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 16 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 45pF 45pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 22ns, 14ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -80dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AS1753S Overview
As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. SPST - NO/NC switching circuits are used in these analog switch ics. A 4 circuit is present in this switch device. Internally, this switch multiplexer has a resistance of 900mOhm. To find out what the functions of 14 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 3.6V. An effective Single supply digital multiplexer. 1.6V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 100nA. Using only a single voltage supply, this analog switch requires 1.6V~3.6V voltage. When the digital multiplexer is charged above 100nA, damage can occur.
AS1753S Features
Switch Circuit: SPST - NO/NC
100nA Supply Current
AS1753S Applications
There are a lot of ams AS1753S Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Cable Modem
- High-Voltage
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Video signal routing
- Signal routing between systems
- Automatic test equipment
- Audio and video signal routing
- Imaging
- SDH
