AS1923A-BSTT-C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Multi-Voltage Supervisor |
| Max Power Dissipation | 696mW |
| Reach Compliance Code | unknown |
| Output | Open Drain or Open Collector |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 55μA |
| Reset | Active Low |
| Voltage - Threshold | 1.58V 2.93V 4.38V Adj |
| Reset Timeout | 120ms Minimum |
| Number of Monitored Inputs | 4 |
| Reset Delay Time | 120 ms |
| RoHS Status | RoHS Compliant |
AS1923A-BSTT-C Overview
There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. 6 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The power management's supply current is 55μA. There are a total of 4 monitored inputs on the power management.
AS1923A-BSTT-C Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current
AS1923A-BSTT-C Applications
There are a lot of ams AS1923A-BSTT-C Voltage Supervisors applications.
- Military communications
- Fire equipment power monitoring system
- Power distribution systems of ICU
- emergency room
- Battery-powered equipment
- Kitchen appliances
- Important electronics for automotive protection
- Detection of phase sequence
- Electronics installed in the vehicle
- Unattended substation automation
