Parameters |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
571mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.6V |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Nominal Supply Current |
200nA |
Output Current |
50mA |
Max Supply Current |
900nA |
Propagation Delay |
15 μs |
Quiescent Current |
500nA |
Response Time |
13000 ns |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Power Supply Rejection Ratio (PSRR) |
86.02dB |
Supply Voltage Limit-Max |
5V |
Max Input Current |
1nA |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
500nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
3mV |
CMRR, PSRR (Typ) |
74dB CMRR, 86.02dB PSRR |
Height |
1.3mm |
Length |
3.05mm |
Width |
1.75mm |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
AS1976-T Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .This comparator is of the CMOS, Push-Pull, Rail-to-Rail output type.This package has been designed with Tape & Reel (TR) .The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 3.6V voltage can complete many demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 1 elements in it.The pinout of the component starts from 5 pins it has.Surface Mount universial mout for easy adapting.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 5 pins on the comparator.A quiescent current of 500nA is observed in this comparator.Normally, the nominal supply current should be 200nA when using the device.Current supply exceeding 900nA could cause disfunction of the compartator.You are allowed to input a maximum current of 1nA into the device.A normal operation requires a voltage of 5V .
AS1976-T Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 500nA
AS1976-T Applications
There are a lot of ams AS1976-T linear comparators applications.
- Limit Comparators
- High-Speed Sampling Circuits
- Industrial
- Infotainment & cluster
- Alarm and Monitoring Circuits
- Zero-Crossing Detectors
- Point of load regulators
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
- Handheld Instruments