AS21P2TLRQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Weight | 7.002332mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Max Power Dissipation | 1.12W |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AS21P2 |
| Number of Outputs | 4 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Power Dissipation | 1.12W |
| Max Supply Current | 200nA |
| Turn On Delay Time | 15 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 13 ns |
| -3db Bandwidth | 55MHz |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 65ns, 40ns |
| Charge Injection | 49pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -72dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Height | 500μm |
| Length | 1.9mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AS21P2TLRQ Overview
Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~85°C TA extended. Based on SPDT switching circuits, these analog multiplexers work. Try searching with AS21P2 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 500mOhm. The datasheets for the 10 pins explain the functions. It is generally not recommended to supply a voltage higher than 4.3V to the switch device in normal circumstances. An effective Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 1.65V. An analogue multiplexer drains from a single voltage supply at 1.65V~4.3V. A digital multiplexer may suffer damage if voltage is applied above 200nA. It is possible to operate 2 inputs. 4 outputs are included in the analogue multiplexer.
AS21P2TLRQ Features
Switch Circuit: SPDT
-3db Bandwidth: 55MHz
AS21P2TLRQ Applications
There are a lot of STMicroelectronics AS21P2TLRQ Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Communications systems
- Precision data acquisition
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ISDN NT1/TA
- Fiber to the Home
- Channel Banks
- Relay Replacement
- Ultrasound
- FTTH
