ASM3I2579AF-06OR
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Frequency Modulator, Spread Spectrum Clock Generator |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ASM3P2579A |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Power Supplies | 2.5/3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Frequency (Max) | 30MHz |
| Halogen Free | Halogen Free |
| Input | CMOS |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 30MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Output Clock Frequency-Max | 30MHz |
| Divider/Multiplier | Yes/No |
| Length | 2.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ASM3I2579AF-06OR Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. As part of the SOT-23-6 Thin, TSOT-23-6 package, this clock generator is embedded. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 6 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 2.5V. As the Clock PLL's input, CMOS is designed to be used in order to generate the clock signal. 1 circuits are used to achieve clock PLL's superior flexibility. There is a maximum frequency of 30MHz Max with this clock-based frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 2.375V~3.6V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. With this clock-generator, you can generate a high-quality clock output frequency of 30MHz. An electrical part such as this one can be classified as a Frequency Modulator, Spread Spectrum Clock Generator component. Microprocessors are specifically designed to use this clock-generating IC, which has a 6-bit output. You can find related electrical components to the base part number ASM3P2579A. The supply voltage should be maintained at 2.5V for high efficiency. As a result, it is commonly classified as a type of Clock Generators clock PLL. There is a ALSO OPERATES WITH 3.3V SUPPLY feature on this frequency generator in order to produce a better clock signal. A supply current of 1.1mA needs to be provided to fully play RF synthesizer's function.
ASM3I2579AF-06OR Features
Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 2.5V
Output clock frequency (Max) of 30MHz
Operating supply voltage of 2.5V
ASM3I2579AF-06OR Applications
There are a lot of ON Semiconductor ASM3I2579AF-06OR Clock Generators applications.
- Digital logic circuits
- Quenching?
- Reference signals to RF systems
- VSAT (Small Ground Satellite Station)
- Frequency synthesis
- Digital circuits
- Automatic control system test
- Frequency shifting decodes
- Bit synchronization
- Broadcast communication
