banner_page

ASM3P2811BF-08SR

3.3V Frequency Modulator, Spread Spectrum Clock Generator 40MHz ASM3P28** Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-ASM3P2811BF-08SR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 389
  • Description: 3.3V Frequency Modulator, Spread Spectrum Clock Generator 40MHz ASM3P28** Clock Generators 8 Pins 8-SOIC (0.154, 3.90mm Width) 8 Terminals Surface Mount 3V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Frequency Modulator, Spread Spectrum Clock Generator
Subcategory Clock Generators
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number ASM3P28**
Output CMOS, TTL
Pin Count 8
JESD-30 Code R-PDSO-G8
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Number of Circuits 1
Frequency (Max) 40MHz
Input CMOS, TTL
Ratio - Input:Output 1:1
Primary Clock/Crystal Frequency-Nom 40MHz
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 4.9mm
RoHS Status RoHS Compliant

ASM3P2811BF-08SR Overview


This clock IC is packaged using the Tape & Reel (TR) method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. 8 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. 1 circuits are used to achieve clock PLL's superior flexibility. An up to 40MHz frequency is provided by this clock-based RF synthesizer. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As long as you provide 3V~3.6V supply voltage, it will work. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. As the name suggests, this is a clock generator that is compatible with CMOS, TTL logic levels. It has been classified as a Frequency Modulator, Spread Spectrum Clock Generator electronic part, which means that it is a semiconductor. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. It is possible to find its related electronic parts by searching for the base part number ASM3P28**. This time clock generator can handle a voltage of 3.3V as its supply voltage. In general, this clock PLL is considered a Clock Generators device.

ASM3P2811BF-08SR Features


Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

ASM3P2811BF-08SR Applications


There are a lot of ON Semiconductor ASM3P2811BF-08SR Clock Generators applications.

  • Skew suppression
  • Wireless infrastructure
  • Picocells, femtocells and small cells
  • Threshold extension
  • Digital logic circuits
  • Modems
  • Various decoding circuits
  • High-speed communication applications
  • Camera systems
  • CB radios

Write a review

Note: HTML is not translated!
    Bad           Good