AT17F040-30JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F040 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Memory Size | 4Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 33MHz |
| Organization | 4MX1 |
| Memory Width | 1 |
| Memory Density | 4194304 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F040-30JU Overview
FPGA uses a nice 20-LCC (J-Lead) package that makes FPGA easy to use.External packaging of type Tube.-40°C~85°C-qualified.Using the FLASH axis, it can be programmed to do whatever you want.There is a voltage of 2.97V~3.63V applied to the device.Mounted in Surface Mount is this memory device.There is a limit of 4Mb MB for the amount of data that can be stored.AT17F040 will give you other related parts.There is a requirement that it is supplied with a voltage of 3.3V.20 terminations with different functions.With 3.63V as the maximum voltage, the memory device can be used.2.97V must be the minimum voltage supplied to the device.A CONFIGURATION MEMORY memory chip like this is used for data storage.If you're reflow soldering, you shouldn't go above 245.A 20 pin is included in it.Through SERIAL-processing, data is transmitted from this memory to the CPU.I would like to mention that this is a memory IC that will be able to work at a 33MHz frequency, so I will mention that.
AT17F040-30JU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
AT17F040-30JU Applications
There are a lot of Microchip Technology AT17F040-30JU applications of configuration proms for FPGAs.
- personal computers
- graphics card
- personal digital assistants
- networking
- eSRAM
- multimedia computers
- mainframes
- eDRAM
- data buffer
- embedded logic
