AT17F040-30VJC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AT17F040 |
| JESD-30 Code | S-PQCC-J20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 3/3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Memory Size | 4Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.02mA |
| Organization | 4MX1 |
| Memory Width | 1 |
| Standby Current-Max | 0.001A |
| Memory Density | 4194304 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
AT17F040-30VJC Overview
20-LCC (J-Lead) is used in this package.External packaging for the Tube series.A qualified individual who has the ability to operate within 0°C~70°C.FLASH allows for programmability.A voltage of 2.97V~3.63V is applied to it.There is a memory device mounted in Surface Mount.A data storage size of 4Mb is allowed.You can search "AT17F040" for other related parts.There is a voltage requirement of 3.3V for supplying it with power.FPGA is possible to connect different functions on the 20 axis at different terminations.There is a maximum voltage of 3.63V that can be applied to this memory device.2.97V is the minimum voltage required to supply the device.A CONFIGURATION MEMORY memory chip is shown here.FPGA is recommended that the reflow soldering temperature be maintained at no more than 225 during the process.Data is transmitted in this memory using a SERIAL process.For the memory chip to operate, it requires a voltage not exceeding 0.02mA.In terms of speed, this is a memory IC that operates at a 33MHz frequency.The use of 3/3.3V power supplies is recommended.
AT17F040-30VJC Features
Operating temperature: 0°C~70°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
AT17F040-30VJC Applications
There are a lot of Microchip Technology AT17F040-30VJC applications of configuration proms for FPGAs.
- DVD disk buffer
- hard disk drive (HDD)
- telecommunications
- workstations,
- mainframes
- eDRAM
- graphics card
- Camcorders
- printers
- nonvolatile BIOS memory
