AT17F040A-30CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F040A |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 50mA |
| Organization | 4MX1 |
| Memory Width | 1 |
| Density | 4 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F040A-30CU Overview
8-TDFN is used in this package.Packing on the outside is Tube.A qualified individual who has the ability to operate within -40°C~85°C.FLASH allows for programmability.With a voltage of 2.97V~3.63V, it is powered.The memory device is mounted in the Surface Mount position.Try searching "AT17F040A" for more parts.The supply voltage should be 3.3V.8 terminations with different functions.With 3.63V as the maximum voltage, the memory device can be used.It is necessary to supply the device with a minimum voltage of 2.97V.Using the CONFIGURATION MEMORY memory chip, we can store data.Reflow soldering should be done at 260°C maximum.FPGA has pins on the 8 axis.A 3.3V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.In terms of Surface Mount applications, this is a suitable product.In order to control the sliding, the controller operates at a frequency of 10MHz.
AT17F040A-30CU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 10MHz.
AT17F040A-30CU Applications
There are a lot of Microchip Technology AT17F040A-30CU applications of configuration proms for FPGAs.
- DVD disk buffer
- hard disk drive (HDD)
- networking
- eSRAM
- workstations,
- servers
- main computer memory
- personal digital assistants
- Cache memory
- embedded logic
