AT17F080A-30CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F080A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 50mA |
| Operating Mode | SYNCHRONOUS |
| Memory Width | 1 |
| Density | 8 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F080A-30CU Overview
An interesting 8-TDFN package is used.External packaging of type Tube.In the state of -40°C~85°C, licensed to work.This device can be programmed using the FLASH language.The voltage fed to it is 2.97V~3.63V.There is a memory device mounted in Surface Mount position for this device.Other related parts can be found by searching "AT17F080A".In order for it to function, it requires a voltage supply of 3.3V.Different functions are associated with 8 terminations.As long as the maximum voltage of the memory device is 3.63V, then the memory device can be used.2.97V is the minimum voltage required to supply the device.An example of a CONFIGURATION MEMORY memory chip can be seen in the picture below.The temperature should be kept below 260 in reflow soldering.In this case, it has 8 pins.3.3V recommends that users apply 3.3V to the part before using it in a circuit so it can run safely and reliably.For applications involving Surface Mount, it is suitable.There is a frequency of 10MHz that is used by the switching controller.
AT17F080A-30CU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 10MHz.
AT17F080A-30CU Applications
There are a lot of Microchip Technology AT17F080A-30CU applications of configuration proms for FPGAs.
- telecommunications
- printers
- DVD disk buffer
- nonvolatile BIOS memory
- hard disk drive (HDD)
- servers
- Cache memory
- multimedia computers
- eSRAM
- networks
