AT17F080A-30JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F080A |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Operating Mode | SYNCHRONOUS |
| Organization | 8MX1 |
| Memory Width | 1 |
| Density | 8 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F080A-30JU Overview
This package is based on a neat 20-LCC (J-Lead) package which is used by it.Packaging outside of Tube.Qualified to operate within -40°C~85°C.FLASH allows for programmability.A voltage of 2.97V~3.63V is applied to it.The memory device is mounted in the Surface Mount position.You can search "AT17F080A" for other related parts.3.3V is the voltage it requires as a supply.Various functions can be applied to 20 terminations.Using this memory device with a maximum voltage of 3.63V is possible.To supply the device, a minimum voltage of 2.97V is a must.This is a CONFIGURATION MEMORY memory chip.In reflow soldering procedure, the temperature should be controlled to no higher than 245.FPGA has pins on the 20 axis.The 3.3V company recommends that users apply 3.3V to the part before using it in a circuit so that it can run safely and reliably in the circuit.In addition to this, it is suitable for Surface Mount-applications as well.A swicthing controller operates at a frequency of 10MHz.50mA is the operating system.
AT17F080A-30JU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 10MHz.
AT17F080A-30JU Applications
There are a lot of Microchip Technology AT17F080A-30JU applications of configuration proms for FPGAs.
- telecommunications
- hard disk drive (HDD)
- nonvolatile BIOS memory
- networking
- graphics card
- supercomputers
- eSRAM
- Cache memory
- Camcorders
- personal digital assistants
