AT17F16A-30CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17F16A |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Programmable Type | FLASH |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 50mA |
| Organization | 16MX1 |
| Memory Width | 1 |
| Density | 16 Mb |
| Memory IC Type | CONFIGURATION MEMORY |
| Write Cycle Time-Max (tWC) | 0.03ms |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17F16A-30CU Overview
There is a neat 8-TDFN package that is used in this program.Packing on the outside is Tube.Qualified to operate within -40°C~85°C.The FLASH programming language can be used to program it.An electric current of 2.97V~3.63V is applied to it.Surface Mount is the orientation of this memory device.Other components related to "AT17F16A" can also be found by searching the word.The supply voltage should be 3.3V.Different functions can be assigned to 8 terminations.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.63V.To supply the device, a minimum voltage of 2.97V is a must.FPGA is a CONFIGURATION MEMORY memory chip that we are talking about here.Reflow soldering should be done at no higher than 260 degrees.The 8 pins are on the board.Before using the part in a circuit, it is recommended that the user apply 3.3V before the part is used in order to ensure that it runs safely and reliably in the circuit.For applications involving Surface Mount, it is suitable.There is a frequency of 10MHz used by the switching controller.
AT17F16A-30CU Features
Operating temperature: -40°C~85°C.
FLASH program capability.
CONFIGURATION MEMORY memory IC.
Frequency: 10MHz.
AT17F16A-30CU Applications
There are a lot of Microchip Technology AT17F16A-30CU applications of configuration proms for FPGAs.
- embedded logic
- supercomputers
- personal computers
- telecommunications
- nonvolatile BIOS memory
- cell phones
- servers
- eSRAM
- DVD disk buffer
- main computer memory
