AT17LV002-10CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV002 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Organization | 2MX1 |
| Memory Width | 1 |
| Density | 2 Mb |
| Standby Current-Max | 0.00035A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Write Protection | HARDWARE |
| Height Seated (Max) | 1.14mm |
| Length | 5.99mm |
| Width | 5.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17LV002-10CU Overview
The package uses a neat 8-TDFN interface.Packing on the outside is Tube.An individual who is qualified to operate within the -40°C~85°C domain.FPGA is programmable through Serial EEPROM.A voltage of 3V~3.6V 4.5V~5.5V is applied to it.Surface Mount is the mounting position of this memory device.Other components related to "AT17LV002" can also be found by searching the word.FPGA reuqires a supply voltage of 3.3V.A termination with different functions in the 8 axis.Using this memory device with a maximum voltage of 3.6V is possible.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.Reflow soldering should be done at 260°C maximum.There are 8 pins on it.Memory is recommended that a 3.3/5V power supply be used.The inclusion of IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO as part of our product line has been done in order to better serve our customers' needs.EEPROM-memory refers to this type of storage.In addition, it is suitable for use in Surface Mount-based applications.There is a frequency of 33MHz that is used by the switching controller.
AT17LV002-10CU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 33MHz.
AT17LV002-10CU Applications
There are a lot of Microchip Technology AT17LV002-10CU applications of configuration proms for FPGAs.
- embedded logic
- servers
- main computer memory
- nonvolatile BIOS memory
- multimedia computers
- graphics card
- networks
- data buffer
- workstations,
- mainframes
