AT17LV002-10JU
| Parameters | |
|---|---|
| Memory Type | EEPROM |
| Organization | 2MX1 |
| Memory Width | 1 |
| Density | 2 Mb |
| Standby Current-Max | 0.00035A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Write Protection | HARDWARE |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV002 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 10mA |
AT17LV002-10JU Overview
This package makes use of the 20-LCC (J-Lead) programming language.Packaging for the external use of Tube.Qualified to perform a variety of tasks within the -40°C~85°C environment.Serial EEPROM allows for programmability.The voltage is 3V~3.6V 4.5V~5.5V.There is a memory device mounted in Surface Mount position for this device.Try searching "AT17LV002" for more parts.There is a voltage requirement of 3.3V for supplying it with power.Different functions can be assigned to 20 terminations.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.An operating voltage of 3V is required in order to supply the device.The temperature should be kept below 245 in reflow soldering.There are 20 pins on it.The use of 3.3/5V power supplies is recommended.The inclusion of IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO will help customers better meet their needs.In other words, a EEPROM memory.In other words, it is suitable for applications using the Surface Mount operating system.In order to control the sliding, the controller operates at a frequency of 33MHz.Memory operates on 5mA.
AT17LV002-10JU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 33MHz.
AT17LV002-10JU Applications
There are a lot of Microchip Technology AT17LV002-10JU applications of configuration proms for FPGAs.
- nonvolatile BIOS memory
- Cache memory
- supercomputers
- hard disk drive (HDD)
- personal computers
- multimedia computers
- eDRAM
- data buffer
- mainframes
- networks
