AT17LV002-10SU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV002 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Organization | 2MX1 |
| Density | 2 Mb |
| Standby Current-Max | 0.00035A |
| Max Frequency | 15MHz |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Write Protection | HARDWARE |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17LV002-10SU Overview
An interesting 20-SOIC (0.295, 7.50mm Width) package is used for this.Packaging for external use.Licensed to operate in -40°C~85°C.Serial EEPROM is the program that allows it to be programmed.The voltage is 3V~3.6V 4.5V~5.5V.The memory device is mounted in Surface Mount.Search "AT17LV002" for related parts.3.3V is the required supply voltage.Various functions can be applied to 20 terminations.Using this memory device with a maximum voltage of 3.6V is possible.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.Reflow soldering should be done at no higher than 250 degrees.Pins on it are 20-shaped.When it comes to speed, this is a memory IC that can work at a frequency of 10MHz, which is very fast.In order for the part to function safely and reliably as part of a circuit, 5V recommends that users apply 5V to the part prior to use in order to ensure that it will work properly.For better customer service, IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO is added.Memory is also called a EEPROM memory.Memory is suMemoryable for Surface Mount applications.The system operates on the 10mA axis.
AT17LV002-10SU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
AT17LV002-10SU Applications
There are a lot of Microchip Technology AT17LV002-10SU applications of configuration proms for FPGAs.
- nonvolatile BIOS memory
- printers
- data buffer
- mainframes
- personal computers
- servers
- hard disk drive (HDD)
- supercomputers
- embedded logic
- cell phones
