AT17LV002-10TQU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 15MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV002 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Operating Mode | SYNCHRONOUS |
| Organization | 2MX1 |
| Memory Width | 1 |
| Density | 2 Mb |
| Standby Current-Max | 0.00035A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Write Protection | HARDWARE |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
AT17LV002-10TQU Overview
This package makes use of the 44-TQFP programming language.Packaging for the external use of Tray.A qualified individual who has the ability to operate within -40°C~85°C.Through Serial EEPROM, it is programmable.A voltage of 3V~3.6V 4.5V~5.5V is applied to it in order to power it.There is a memory device mounted in Surface Mount position for this device.You can search "AT17LV002" for other related parts.3.3V is the required supply voltage.There are different functions that can be applied on the 44 axis when it comes to terminating.This memory device can be used with a maximum voltage of 3.6V.It is necessary to supply the device with a minimum voltage of 3V.FPGA is recommended that the reflow soldering temperature be maintained at no more than 260 during the process.A 44 pin is included in it.The best power supply to use is a 3.3/5V power supply, which is highly recommended.For better customer service, IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO is added.There is a memory type that is known as a EEPROM memory.This is an application suitable for Surface Mount-based operating systems.Using the switching controller, you will be able to move the slider at a frequency of 15MHz.
AT17LV002-10TQU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 15MHz.
AT17LV002-10TQU Applications
There are a lot of Microchip Technology AT17LV002-10TQU applications of configuration proms for FPGAs.
- networking
- mainframes
- nonvolatile BIOS memory
- networks
- embedded logic
- eDRAM
- personal computers
- data buffer
- personal digital assistants
- eSRAM
