AT17LV010A-10JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV010A |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Organization | 1MX1 |
| Density | 1 Mb |
| Standby Current-Max | 0.0002A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
| Write Protection | HARDWARE |
| Ready/Busy | YES |
| Height | 3.68mm |
| Length | 9.04mm |
| Width | 9.04mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17LV010A-10JU Overview
A neat 20-LCC (J-Lead) package is used.Packaging for the external environment.-40°C~85°C license holder.This device can be programmed using the Serial EEPROM language.FPGA is powered by a voltage which is 3V~3.6V 4.5V~5.5V volts, and this voltage is the voltage from which the generator is powered.Mounted in Surface Mount is this memory device.Search "AT17LV010A" for related parts.The supply voltage is 3.3V.Various functions can be applied to 20 terminations.FPGA is possible to use this memory device at a maximum voltage of 3.6V.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.FPGA is recommended that the reflow soldering temperature be maintained at no more than 245 during the process.A 20 pin is included in it.In order for the part to function safely and reliably as part of a circuit, 5V recommends that users apply 5V to the part prior to use in order to ensure that it will work properly.In order to better serve the needs, ALSO OPERATES AT 5V SUPPLY is included.There is a memory type that is known as a EEPROM memory.In terms of Surface Mount applications, this is a suitable product.In order to control the sliding, the controller operates at a frequency of 33MHz.Using 10mA, it operates.
AT17LV010A-10JU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 33MHz.
AT17LV010A-10JU Applications
There are a lot of Microchip Technology AT17LV010A-10JU applications of configuration proms for FPGAs.
- servers
- eSRAM
- cell phones
- graphics card
- printers
- workstations,
- personal digital assistants
- telecommunications
- Camcorders
- personal computers
