AT17LV040-10TQU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 15MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV040 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Organization | 4MX1 |
| Memory Width | 1 |
| Density | 4 Mb |
| Standby Current-Max | 0.0001A |
| Write Protection | HARDWARE |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT17LV040-10TQU Overview
FPGA uses a neat 44-TQFP package.External packaging of type Tray.In the state of -40°C~85°C, licensed to work.Using Serial EEPROM, you can program it.The voltage fed to it is 3V~3.6V 4.5V~5.5V.This memory device is mounted in Surface Mount.Search "AT17LV040" for related parts.The supply voltage should be 3.3V.A termination with different functions in the 44 axis.FPGA is possible to use this memory device at a maximum voltage of 3.6V.3V is the minimum voltage required to supply the device.The temperature should be kept below 260 in reflow soldering.Pins on it are 44-shaped.In order to obtain the best performance, it is recommended to use a 3.3V power supply.Memory features IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO to better serve the need.Known as a EEPROM memory.In terms of Surface Mount applications, this is a suitable product.There is a frequency of 15MHz that is used by the switching controller.
AT17LV040-10TQU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 15MHz.
AT17LV040-10TQU Applications
There are a lot of Microchip Technology AT17LV040-10TQU applications of configuration proms for FPGAs.
- mainframes
- nonvolatile BIOS memory
- eDRAM
- main computer memory
- Camcorders
- networking
- eSRAM
- printers
- hard disk drive (HDD)
- personal digital assistants
