AT17LV256-10NU
| Parameters | |
|---|---|
| Write Protection | HARDWARE |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT17LV256 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | Serial EEPROM |
| Interface | 2-Wire, Serial |
| Memory Size | 256Kb |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Memory Type | EEPROM |
| Organization | 256KX1 |
| Density | 256 kb |
| Standby Current-Max | 0.00015A |
| Endurance | 100000 Write/Erase Cycles |
| Data Retention Time-Min | 90 |
AT17LV256-10NU Overview
8-SOIC (0.154, 3.90mm Width) is used in this package.External packaging for the Tube series.A qualified individual who has the ability to operate within -40°C~85°C.Using Serial EEPROM, you can program it.FPGA is fed wFPGAh a voltage of 3V~3.6V 4.5V~5.5V.Surface Mount is the orientation of this memory device.A data storage size of 256Kb is allowed.Other related parts can be found by searching "AT17LV256".Supply voltage 3.3V is required.There are different functions associated with 8 terminations.This memory device can be used with a maximum voltage of 3.6V.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.The reflow soldering process should be done at a temperature no higher than 260.FPGA is equipped wFPGAh 8 pins.In order to obtain the best performance, it is recommended to use a 3.3V power supply.Memory is recommended that users apply 5V to the part before use in order for Memory to function safely in a circuMemory.Thus, IT CAN OPERATES ON 4.75-5.25 RANGE SUPPLY VOLTAGE ALSO is included to better serve customers.Known as a EEPROM memory.In terms of Surface Mount applications, this is a suitable product.Using the switching controller, you will be able to move the slider at a frequency of 33MHz.10mA is its operating system.
AT17LV256-10NU Features
Operating temperature: -40°C~85°C.
Serial EEPROM program capability.
EEPROM memory
Frequency: 33MHz.
AT17LV256-10NU Applications
There are a lot of Microchip Technology AT17LV256-10NU applications of configuration proms for FPGAs.
- DVD disk buffer
- Cache memory
- main computer memory
- graphics card
- eSRAM
- cell phones
- multimedia computers
- workstations,
- eDRAM
- networking
