AT32UC3L0256-D3HT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFLGA Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | AVR®32 UC3 L |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Base Part Number | AT32UC3L0256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.98V |
| Power Supplies | 1.81.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 6 |
| Number of Programmable I/O | 36 |
| Length | 5.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AT32UC3L0256-D3HT Overview
A space-saving advantage is that it is included in the 48-UFLGA Exposed Pad package. Using Surface Mount, it is mounted. It comes in the package?of a Tray. Devices with AVR core processors are available. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. It has a number of 36I/Os. A comparable component can be found by using the base part number AT32UC3L0256. BOTTOM is the position of its terminals on the board. 48 terminationals are present. The AVR?32 UC3 L series contains this electrical component. Because of the 1.8V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There are 48 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. It falls under the category of Microcontrollers. The devices have a maximum memory size of 256kB that can be used to store programs and data. Power is provided by a source of 1.81.8/3.3V. This device works well at 50MHz frequency when it is operating at a high rate of efficiency. Using 1.8V's adaptability as a supply voltage allows designers to maximize its use. A total of 6 timers/counters have been set up. 36 is the number of programmable I/O. Using a Internal oscillator type, it works well.
AT32UC3L0256-D3HT Features
48-UFLGA Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
AT32UC3L0256-D3HT Applications
There are a lot of Microchip Technology AT32UC3L0256-D3HT Microcontroller applications.
- Radio
- Robots
- Food and beverage
- Magnetic resonance imaging (MRI)
- Measuring revolving objects
- Light sensing & controlling devices
- Copiers
- Electromechanical control
- Torpedo guidance
- Removable disks
