AT89C5115-SISUM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 89C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Base Part Number | AT89C5115 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | UART, USART |
| Memory Size | 16kB |
| Oscillator Type | External |
| Number of I/O | 20 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 80C51 |
| Peripherals | POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Core Architecture | 8051 |
| EEPROM Size | 2K x 8 |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT89C5115-SISUM Overview
For space savings, it is available in the 28-LCC (J-Lead) package. This is mounted using the Surface Mount method. A package of Tube contains it. There is a 80C51 as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FLASH. A total of 20 I/Os are available on this device. It has a base part number of AT89C5115 that can be used to find other components that are comparable. The terminals are positioned at QUAD. As far as terminations are concerned, there are 28 terminations present. This electrical component is part of the 89C series. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A number of 28 pins are used to construct it. A method of mounting is used, which is Surface Mount. Microcontrollers contains this component. The devices have a memory size of 16kB that can be used to store programs and data. Its core architecture is 8051. This device achieves excellent efficiency at frequencies of 40MHz. It appears that there are 3 timers/counters in use. Normal operation requires a supply voltage (Vsup) above 3V. Using oscillator type External makes it work.
AT89C5115-SISUM Features
28-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
AT89C5115-SISUM Applications
There are a lot of Microchip Technology AT89C5115-SISUM Microcontroller applications.
- Electronic jamming systems
- Scanners
- Auto-breaking system
- Projector
- Playstation
- Glucose monitoring systems (for Type 1 Diabetes)
- Embedded gateways
- Heater/Fan
- Virtual reality VR robots
- Fabric
