AT89C51IC2-SLRUM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2004 |
| Series | 89C |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Base Part Number | AT89C51IC2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | External |
| Number of I/O | 34 |
| Speed | 60 MHz |
| RAM Size | 1.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 80C51 |
| Peripherals | POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Access Time | 40 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Core Architecture | 8051 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 4.57mm |
| Length | 16.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT89C51IC2-SLRUM Overview
As a result, it is available in the 44-LCC (J-Lead) package. Mounted using Surface Mount. A package of Cut Tape (CT) contains it. The device runs in 80C51 core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 34 I/Os on the board. It has a base part number of AT89C51IC2 that can be used to find other components that are comparable. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 44 terminations present. It is a member of the 89C series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. It is constructed using 44 pins. Mounting is performed in accordance with Surface Mount. Memory size for the devices is 32kB, which can be used to store programs and data. 8051 is the foundation of its architecture. It is highly efficient when it works at a frequency of 40MHz. There are 3 timers/counters. Vsup should be kept above 4.5V for normal operation. An oscillator type External is required for it to work.
AT89C51IC2-SLRUM Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
AT89C51IC2-SLRUM Applications
There are a lot of Microchip Technology AT89C51IC2-SLRUM Microcontroller applications.
- Toasters
- Ipad
- Equipment control
- Nintendo
- Communication-bluetooth, Wi-Fi, radio
- Binding machines
- Instrument control
- Digital TVs
- Microwave ovens
- Scanners
